Straight Ray with Volume Data Misfit Term

Based on the SEG abstract Heagy, Cockett and Oldenburg, 2014.

Heagy, L. J., Cockett, A. R., & Oldenburg, D. W. (2014, August 5). Parametrized Inversion Framework for Proppant Volume in a Hydraulically Fractured Reservoir. SEG Technical Program Expanded Abstracts 2014. Society of Exploration Geophysicists. doi:10.1190/segam2014-1639.1

This example is a simple joint inversion that consists of a

• data misfit for the tomography problem

• data misfit for the volume of the inclusions (uses the effective medium theory mapping)

• model regularization

• 
• 
• 
• 

True Volume: 0.6240000000000001

Running inversion with SimPEG v0.23.1.dev10+gf697d2455
simpeg.InvProblem will set Regularization.reference_model to m0.
simpeg.InvProblem will set Regularization.reference_model to m0.
simpeg.InvProblem will set Regularization.reference_model to m0.
simpeg.InvProblem will set Regularization.reference_model to m0.
simpeg.InvProblem will set Regularization.reference_model to m0.

                    simpeg.InvProblem is setting bfgsH0 to the inverse of the eval2Deriv.
                    ***Done using the default solver Pardiso and no solver_opts.***

model has any nan: 0
=============================== Projected GNCG ===============================
  #     beta     phi_d     phi_m       f      |proj(x-g)-x|  LS    Comment
-----------------------------------------------------------------------------
x0 has any nan: 0
   0  2.50e-01  8.49e+04  0.00e+00  8.49e+04    3.83e+01      0
   1  2.50e-01  3.98e+03  9.97e-01  3.98e+03    3.66e+01      0
/home/vsts/work/1/s/simpeg/maps/_property_maps.py:1456: UserWarning:

Maximum number of iterations reached

   2  2.50e-01  8.92e+02  8.52e-01  8.92e+02    3.23e+01      0
   3  2.50e-01  8.21e+02  7.24e-01  8.22e+02    2.20e+01      1
   4  2.50e-01  3.87e+02  7.44e-01  3.88e+02    1.69e+01      0
   5  2.50e-01  1.23e+02  7.33e-01  1.24e+02    1.50e+01      0
   6  2.50e-01  5.33e+01  7.33e-01  5.35e+01    1.32e+01      1   Skip BFGS
   7  2.50e-01  4.17e+01  7.21e-01  4.19e+01    1.31e+01      0
   8  2.50e-01  2.12e+01  7.14e-01  2.14e+01    1.15e+01      0
   9  2.50e-01  1.39e+01  7.13e-01  1.40e+01    9.73e+00      0
  10  2.50e-01  1.12e+01  7.13e-01  1.13e+01    8.82e+00      0
  11  2.50e-01  7.65e+00  7.10e-01  7.82e+00    8.27e+00      0
  12  2.50e-01  5.39e+00  7.10e-01  5.57e+00    7.32e+00      0
  13  2.50e-01  4.55e+00  7.09e-01  4.73e+00    6.82e+00      0
  14  2.50e-01  3.93e+00  7.09e-01  4.10e+00    6.84e+00      0
  15  2.50e-01  3.35e+00  7.08e-01  3.53e+00    6.24e+00      0   Skip BFGS
------------------------- STOP! -------------------------
1 : |fc-fOld| = 5.7216e-01 <= tolF*(1+|f0|) = 8.4948e+03
0 : |xc-x_last| = 2.3298e-01 <= tolX*(1+|x0|) = 1.0000e-01
0 : |proj(x-g)-x|    = 6.2433e+00 <= tolG          = 1.0000e-01
0 : |proj(x-g)-x|    = 6.2433e+00 <= 1e3*eps       = 1.0000e-02
1 : maxIter   =      15    <= iter          =     15
------------------------- DONE! -------------------------

Total recovered volume (no vol misfit term in inversion): 0.025407472266617808

Running inversion with SimPEG v0.23.1.dev10+gf697d2455

                    simpeg.InvProblem is setting bfgsH0 to the inverse of the eval2Deriv.
                    ***Done using the default solver Pardiso and no solver_opts.***

model has any nan: 0
=============================== Projected GNCG ===============================
  #     beta     phi_d     phi_m       f      |proj(x-g)-x|  LS    Comment
-----------------------------------------------------------------------------
x0 has any nan: 0
   0  2.50e-01  1.20e+05  0.00e+00  1.20e+05    1.53e+01      0
   1  2.50e-01  7.91e+03  8.47e-01  7.91e+03    2.72e+01      0
   2  2.50e-01  7.88e+03  7.90e-01  7.88e+03    2.62e+01      3
   3  2.50e-01  7.65e+03  7.33e-01  7.65e+03    2.52e+01      3
   4  2.50e-01  7.58e+03  6.90e-01  7.58e+03    2.44e+01      3
   5  2.50e-01  7.45e+03  6.61e-01  7.45e+03    2.38e+01      3   Skip BFGS
------------------------------------------------------------------
0 :    ft     = 7.4565e+03 <= alp*descent     = 7.4543e+03
1 : maxIterLS =      10    <= iterLS          =     10
------------------------- End Linesearch -------------------------
The linesearch got broken. Boo.

Total volume (vol misfit term in inversion): 0.037590154847430196

import numpy as np
import scipy.sparse as sp
import matplotlib.pyplot as plt

from simpeg.seismic import straight_ray_tomography as tomo
import discretize
from simpeg import (
    maps,
    utils,
    regularization,
    optimization,
    inverse_problem,
    inversion,
    data_misfit,
    objective_function,
)


class Volume(objective_function.BaseObjectiveFunction):
    r"""
    A regularization on the volume integral of the model

    .. math::

        \phi_v = || \int_V m dV - \text{knownVolume} ||^2
    """

    def __init__(self, mesh, knownVolume=0.0, **kwargs):
        self.mesh = mesh
        self.knownVolume = knownVolume
        super().__init__(**kwargs)

    @property
    def knownVolume(self):
        """known volume"""
        return self._knownVolume

    @knownVolume.setter
    def knownVolume(self, value):
        self._knownVolume = utils.validate_float("knownVolume", value, min_val=0.0)

    def __call__(self, m):
        return (self.estVol(m) - self.knownVolume) ** 2

    def estVol(self, m):
        return np.inner(self.mesh.cell_volumes, m)

    def deriv(self, m):
        # return (self.mesh.cell_volumes * np.inner(self.mesh.cell_volumes, m))
        return (
            2
            * self.mesh.cell_volumes
            * (self.knownVolume - np.inner(self.mesh.cell_volumes, m))
        )  # factor of 2 from deriv of ||estVol - knownVol||^2

    def deriv2(self, m, v=None):
        if v is not None:
            return 2 * utils.mkvc(
                self.mesh.cell_volumes * np.inner(self.mesh.cell_volumes, v)
            )
        else:
            # TODO: this is inefficent. It is a fully dense matrix
            return 2 * sp.csc_matrix(
                np.outer(self.mesh.cell_volumes, self.mesh.cell_volumes)
            )


def run(plotIt=True):
    nC = 40
    de = 1.0
    h = np.ones(nC) * de / nC
    M = discretize.TensorMesh([h, h])

    y = np.linspace(M.cell_centers_y[0], M.cell_centers_x[-1], int(np.floor(nC / 4)))
    rlocs = np.c_[0 * y + M.cell_centers_x[-1], y]
    rx = tomo.Rx(rlocs)

    source_list = [
        tomo.Src(location=np.r_[M.cell_centers_x[0], yi], receiver_list=[rx])
        for yi in y
    ]

    # phi model
    phi0 = 0
    phi1 = 0.65
    phitrue = utils.model_builder.create_block_in_wholespace(
        M.gridCC, [0.4, 0.6], [0.6, 0.4], [phi1, phi0]
    )

    knownVolume = np.sum(phitrue * M.cell_volumes)
    print("True Volume: {}".format(knownVolume))

    # Set up true conductivity model and plot the model transform
    sigma0 = np.exp(1)
    sigma1 = 1e4

    if plotIt:
        fig, ax = plt.subplots(1, 1)
        sigmaMapTest = maps.SelfConsistentEffectiveMedium(
            nP=1000, sigma0=sigma0, sigma1=sigma1, rel_tol=1e-1, maxIter=150
        )
        testphis = np.linspace(0.0, 1.0, 1000)

        sigetest = sigmaMapTest * testphis
        ax.semilogy(testphis, sigetest)
        ax.set_title("Model Transform")
        ax.set_xlabel(r"$\varphi$")
        ax.set_ylabel(r"$\sigma$")

    sigmaMap = maps.SelfConsistentEffectiveMedium(M, sigma0=sigma0, sigma1=sigma1)

    # scale the slowness so it is on a ~linear scale
    slownessMap = maps.LogMap(M) * sigmaMap

    # set up the problem and survey
    survey = tomo.Survey(source_list)
    problem = tomo.Simulation(M, survey=survey, slownessMap=slownessMap)

    if plotIt:
        _, ax = plt.subplots(1, 1)
        cb = plt.colorbar(M.plot_image(phitrue, ax=ax)[0], ax=ax)
        survey.plot(ax=ax)
        cb.set_label(r"$\varphi$")

    # get observed data
    data = problem.make_synthetic_data(phitrue, relative_error=0.03, add_noise=True)
    dpred = problem.dpred(np.zeros(M.nC))

    # objective function pieces
    reg = regularization.WeightedLeastSquares(M)
    dmis = data_misfit.L2DataMisfit(simulation=problem, data=data)
    dmisVol = Volume(mesh=M, knownVolume=knownVolume)
    beta = 0.25
    maxIter = 15

    # without the volume regularization
    opt = optimization.ProjectedGNCG(maxIter=maxIter, lower=0.0, upper=1.0)
    opt.remember("xc")
    invProb = inverse_problem.BaseInvProblem(dmis, reg, opt, beta=beta)
    inv = inversion.BaseInversion(invProb)

    mopt1 = inv.run(np.zeros(M.nC) + 1e-16)
    print(
        "\nTotal recovered volume (no vol misfit term in inversion): "
        "{}".format(dmisVol(mopt1))
    )

    # with the volume regularization
    vol_multiplier = 9e4
    reg2 = reg
    dmis2 = dmis + vol_multiplier * dmisVol
    opt2 = optimization.ProjectedGNCG(maxIter=maxIter, lower=0.0, upper=1.0)
    opt2.remember("xc")
    invProb2 = inverse_problem.BaseInvProblem(dmis2, reg2, opt2, beta=beta)
    inv2 = inversion.BaseInversion(invProb2)

    mopt2 = inv2.run(np.zeros(M.nC) + 1e-16)
    print("\nTotal volume (vol misfit term in inversion): {}".format(dmisVol(mopt2)))

    # plot results

    if plotIt:
        fig, ax = plt.subplots(1, 1)
        ax.plot(data.dobs)
        ax.plot(dpred)
        ax.plot(problem.dpred(mopt1), "o")
        ax.plot(problem.dpred(mopt2), "s")
        ax.legend(["dobs", "dpred0", "dpred w/o Vol", "dpred with Vol"])

        fig, ax = plt.subplots(1, 3, figsize=(16, 4))
        im0 = M.plot_image(phitrue, ax=ax[0])[0]
        im1 = M.plot_image(mopt1, ax=ax[1])[0]
        im2 = M.plot_image(mopt2, ax=ax[2])[0]

        for im in [im0, im1, im2]:
            im.set_clim([0.0, phi1])

        plt.colorbar(im0, ax=ax[0])
        plt.colorbar(im1, ax=ax[1])
        plt.colorbar(im2, ax=ax[2])

        ax[0].set_title("true, vol: {:1.3e}".format(knownVolume))
        ax[1].set_title(
            "recovered(no Volume term), vol: {:1.3e} ".format(dmisVol(mopt1))
        )
        ax[2].set_title(
            "recovered(with Volume term), vol: {:1.3e} ".format(dmisVol(mopt2))
        )

        plt.tight_layout()


if __name__ == "__main__":
    run()
    plt.show()

Estimated memory usage: 293 MB